Start and lock dispensers from one screen
Staff pick a position and start dispensing from the screen — less running between the shop and the forecourt, and fewer communication mistakes.
FuelSmart Pump
Fuel dispenser control software — connects to dispensers of every brand
End the sync problems with a complete dispenser control system. The FuelSmart Pump intelligent dispenser controller turns the computer screen into a control centre for every island: start dispensing and lock dispensers instantly from a single screen, so staff can stop and lock nozzles without running to the forecourt — while litres and money are read in real time and dispenser anomalies are caught while they are still small, before they become losses in the hundreds of thousands.
Last updated:
- Real-time totals
- Works without internet
- Automatic nozzle locking
Key capabilities of Dispenser Control
Designed from problems we see on real forecourts. Every feature is in daily use at customer stations — not just numbers in a brochure.
Read dispensing totals in real time
See litres and baht on every nozzle simultaneously — which nozzle is busy, which is free — so customer queues are managed faster.
Detect total discrepancies
The system compares actual dispensed volumes against expected values and alerts on backflows, cross-shift total jumps, or abnormal device adjustments.
Automatic nozzle locking
Configure automatic stop when stock falls below a threshold or a customer's credit exceeds their limit — preventing uncollectible balances from ballooning.
Keeps working without internet
Runs on the station's internal network — selling continues even when the internet is down, and data syncs to the cloud automatically once it's back.
Multiple connection standards
Supports RS-232, RS-485 and TCP-IP connections with leading dispenser protocols, so it works with your existing hardware immediately.
Technical specifications
| Supported protocols | IFSF, Wayne, Tokheim, Gilbarco, Tatsuno and brand-specific protocols |
|---|---|
| Connection types | RS-232 / RS-485 / TCP-IP over LAN or fiber |
| Command latency | Millisecond-level response on the internal network |
| Offline mode | Fully functional without an internet connection |
| Installation | Existing cabling can be reused in most cases — minimal new wiring |
| Updates | Remote program updates by the support team |
FAQ about Dispenser Control
Other products you may like
All modules work together and share data automatically.
Interested in Dispenser Control? Start with a free consultation
Our team is ready to assess your station and recommend the best installation plan.